Just look

Ceiling-fan-light-works-but-fan-doesn-t, if your ceiling fan quit working, but the light still works, and you hear a humming sound, you might be looking at a blown motor capacitor. they can burn out for a number of reasons, the major two reasons being old age or overheating. checking this part of the fan is also relatively simple.. I replaced a ceiling light, controlled by 2 switches, with a new ceiling fan and light kit. the light kit works but the fan doesn't. the electrical box in the ceiling has 1 black, 1 white and 1 bare ground wire., when a ceiling fan doesn’t work at all, the first thing to do is to make sure it is receiving electrical power from its switch and from your home’s circuit breaker or fuse box. first check the circuit breaker or fuse, then the switch. find the electrical panel that serves the ceiling fan’s circuit..

Turn off the breaker supplying electricity to the ceiling fan at you main electrical panel if the tester does not light. remove the screws holding the switch cover plate over the ceiling fan and..., neither fan works, but both lights on the fans work fine. the walls in each bedroom have 2 light switches: one (single) that controls a wall outlet, another (double) that control the fan lights. both switches on the double will turn off or on the lights. no combination of switches allows the fan to turn on..

Hunter ceiling fan home depot lights don't work fan works simple fix., if the ceiling fan is wired on the same switch as your lights are, and the lights are still working fine as you say, the culprit maybe a defective fan switch. if you have humming between pulls as the previous user stated, it maybe a capacitor that has gone bad too. but first, i would check with replacing the fan speed switch on your ceiling fan..

The lights work, but the fan doesn’t select the issue you are having with your fan: the fan blades move freely when you push them this indicates that there is not something physically in the way of the fan blades moving and it is most likely electric or mechanical., the wiring for the light is usually not the cause of a nonfunctioning light. if the fan works, the lights should work. inspecting the wiring requires disconnecting the retaining screws that connect the fan to the mounting bracket in the ceiling and lowering the fan a few inches..

I have a ceiling fan that is wired through a wall switch and it has a pull chain for the fan and another for the lights. the other day i turned on the wall switch and got a blue flash and the lights